Project: Micro-Reddit

Introduction

In this project, you’ll get to spend some quality time with models. We will be doing some data modeling and putting your active record knowledge to practice by building your own light weight Reddit clone.

Warmup: Thinking data first

The first step to building a good data model is usually not on the computer. You’ll want to take a minute and think through what you’re going to need. You may not really know everything when you first start, but mapping out an approach path is crucial to avoiding costly mistakes later.

In this warmup, you’ll be given a variety of scenarios and you’ll be asked to map out what the data models will look like for each one. You can do it with a pen and paper or, if you’re lucky enough to be around one, a whiteboard. There are a few specific accepted techniques for how to map out models and associations but just do whatever comes naturally to you. One way to do it is with a list of models and another is to create a visual diagram where each model is represented by a box and you connect them with appropriate arrows.

For each scenario, you’ll be asked to write down the data, associations, and validations necessary to build it. That means which models (data tables) will be necessary to store the data (and which columns you will need), which fields of those tables will be subject to validation (e.g. minimum password length or username uniqueness). Don’t worry if you’re not quite sure how to implement a given thing, the point here is to start thinking about how the data would be structured.

Example: You are building a blog for your startup which will have multiple authors and each author can write multiple posts.

This might look like:

Note: We’ll include the :id, :created_at and :updated_at columns but you can safely assume they’re always there since Rails or the database gives them to you automatically

Authors

  username:string [unique, 4-12 chars, present]
  email:string [unique, present]
  password:string [6-16 chars, present]
  id:integer
  created_at:datetime
  updated_at:datetime

  has_many posts

Posts

  title:string [unique, present]
  body:text [present]
  author_id:integer [present]
  id:integer
  created_at:datetime
  updated_at:datetime

  belongs_to author

Use whatever format feels best to you.

Data model task

For each of the following scenarios, write down the models, columns, validations and associations you might use to implement it. Some of these are more difficult than others and you’ll have to use a bit of creativity to infer which columns might need to be present for the scenario to make sense in the real world.

The trick is identifying what should be a different model and how these models will relate to each other via associations (all the ones below are has_many, has_one and/or belongs_to relationship). If you can’t quite figure out how it might look, keep the scenario in mind as you go through the next few lessons.

Remember, if you feel like you will be hard coding data multiple times, it’s probably a sign that you should create a separate table. A common example is address information – you could write down the city and state explicitly for each user. How about making separate City and State models and relating them to each other?

You are building an online learning platform (much like this!). You’ve got many different courses, each with a title and description, and each course has multiple lessons. Lesson content consists of a title and body text.
You are building the profile tab for a new user on your site. You are already storing your user’s username and email, but now you want to collect demographic information like city, state, country, age and gender. Think – how many profiles should a user have? How would you relate this to the User model?
You want to build a virtual pinboard, so you’ll have users on your platform who can create “pins”. Each pin will contain the URL to an image on the web. Users can comment on pins (but can’t comment on comments).
You want to build a message board like Hacker News. Users can post links. Other users can comment on these submissions or comment on the comments. How would you make sure a comment knows where in the hierarchy it lives?

Let’s build Reddit. Well, maybe a very junior version of it called micro-reddit. In this project, you’ll build the data structures necessary to support link submissions and commenting. We won’t build a front end for it because we don’t need to… you can use the Rails console to play around with models without the overhead of making HTTP requests and involving controllers or views.

Speaking of the console, here are a few convenient shortcut commands you can use:

rails c (for rails console)
rails s (for rails server)
rails g ... (for rails generate ...)

Feel free to use whatever you feel more comfortable with. We’ll still refer to the full commands in the following lessons for clarity.

Your task

Get started

Just like in the warmup, plan out what data models you would need to allow users to be on the site (don’t worry about login/logout or securing the passwords right now), to submit links (“posts”), and to comment on links. Users do NOT need to be able to comment on comments… each comment refers to a Post.
Generate a new rails app from the command line ($ rails new micro-reddit) and open it up. We’ll use the default SQLite3 database so you shouldn’t have to change anything on that front.
Generate your User model and fill out the migration to get the columns you want.
Run the migration with $ rails db:migrate. You can use $ rails db:rollback if you realize you forgot anything or just create a new migration for the correction (which might involve the #add_column #remove_column or #change_column commands). See the Rails API Documentation for details on syntax and available methods.

Playing with validations

In a new tab, open up the $ rails console (you may use rails c for short). Try asking for all the users with > User.all. You should get back an empty array (no users yet!). Now create a blank new user and store it to a variable with > u = User.new. This user has been created in the ether of Ruby’s memory but hasn’t been saved to the database yet. Remember, if you’d used the #create method instead of the #new method, it would have just gone ahead and tried to save the new user right off the bat. Instead, we now get to play with it.
Check whether your new user is actually valid (e.g. will it save if we tried?). > u.valid? will run all the validations. It comes up true… surprise! We haven’t written any validations so that’s to be expected. It’s also a problem because we don’t want to have users running around with blank usernames.
Implement the user validations you thought of in the first step in your app/models/user.rb file. These might involve constraints on the size of the username and that it must be present (otherwise you’ll potentially have users with no usernames!) and that it must be unique.
Reload your console using > reload!. You’ll need to do this every time you make changes to your app so the console can reload the current version. If it still seems broken, just > quit out of it and relaunch (sometimes #reload! doesn’t seem to do the trick). Build another new user but don’t save it yet by using > u2 = User.new. Run > u2.valid? again to run the validations and it should come up false. Good.
How do we find out what went wrong? Rails is helpful because it actually attaches error messages directly onto your user object when you fail validations so you can read into them with the #errors method. Try out > u2.errors to see the errors or, better, > u2.errors.full_messages to return a nice friendly array of messages. If you wrote custom messages into your validations, they will show up here as well.
Create a user who will actually save with > u3 = User.new(your_attributes_here) and run the validations. They should come up true. Save your user with the #save method so you’ve got your first user in the database.

Playing with associations

Create your Post model by referencing your data plan from the first step above, migrate the database, and add its validations.
Test your validations from the console, remembering to reload or relaunch it between changes.
Now set up your associations between User and Post models. Did you remember to include the foreign key column (user_id) in your posts table? If not, you can just add a new migration ($ rails generate migration yourmigrationname) and use the #add_column method mentioned above.
If you’ve properly set up your associations, you should be able to use a few more methods in the console, including finding a User’s Posts and finding the Post’s User. First test finding your lone User’s Posts – > User.first.posts. It should be an empty array since you haven’t created posts, but it shouldn’t throw an error at you.
Build (but don’t yet save) a new post from the console, called p1, something like > p1 = Post.new(your_attributes_here). Don’t forget to include the ID of the user in your user_id field!
Now build another post using the association to the user – substitute #new with #build and run through the association instead – p2 = User.first.posts.build. Don’t fill in any fields yet. Examine the object that was created and you’ll see that the ID field already got filled out for you, cool! This is a neat trick you’ll learn about in the lesson on associations.
Save your original new post p1 so your user has officially written something. Test that you can use the other side of the association by trying > Post.first.user, which should return the original User object whose ID you pointed to when building the post. All has come full circle!

Add in commenting

You’ve now got a User and a Post and they’ve been linked. Commenting will look quite similar to your Post model but will be related not just to the post who is its “parent” but also to the user who has authored it. Set up the migration and migrate the database for your Comment model.
As before, add validations into your model and test them out in the console (refresh it!). Make sure you’ve required the two foreign keys (for posts and users) to be submitted, otherwise you could potentially have an orphan comment. You should not be able to save an invalid Comment and be able to save a valid Comment.
Build a second user and create a new comment which represents this user commenting on the first user’s post.
As before, add the associations you need between users, posts, and comments. You’ll need to be able to do the following methods successfully from the console (assuming your second user has an ID of 2):
1. > u2 = User.find(2)
2. > c1 = u2.comments.first should return that user’s comment. #comments returns an array with comments, which is why we need to use #first to actually retrieve the comment itself.
3. > c1.user should return that comment’s author User (u2).
4. > p1 = Post.first
5. > p1.comments.first should return the comment c1.
6. > c1.post should return the post p1.

If any of those don’t work, double check your associations. Sometimes the error messages can be helpful in prompting you for how to set up those associations.

Additional resources

This section contains helpful links to related content. It isn’t required, so consider it supplemental.

The Rails API has good documentation for these things, in addition to the Edge Guides you’ve already read. Often it can be easier to search Google for the proper API page than navigating the site, e.g. “rails api has_many”.
JumpstartLab page on Model Relationships has some good unique information on how to approach optimizing common associations.

Improve on GitHub Report an issue See lesson changelog

View Course Sign in to track progress Next Lesson

Project: Micro-Reddit

Ruby on Rails Course

Introduction

Warmup: Thinking data first

Data model task